home *** CD-ROM | disk | FTP | other *** search
- cls
- echo off
- echo ┌────────────────────────────────────────────────────────────────────┐
- echo │ Before printing the PC-Type 4 manual, you must have "unzipped" │
- echo │ the documentation files. To do this, follow these steps: │
- echo │ 1. Copy the files from the PC-Type 4 documentation disk to │
- echo │ your hard disk using the DOS COPY command. For example, to │
- echo │ copy the files to the PCTYPE subdirectory on your C drive, │
- echo │ insert the PC-Type 4 documentation disk in drive A and type: │
- echo │ COPY A:*.* C:\PCTYPE │
- echo │ and press (Enter). │
- echo │ 2. Change to the drive and directory you copied the files to in │
- echo │ step 1. │
- echo │ 3. "Unzip" the documentation files. To do this, type the │
- echo │ following: │
- echo │ PKUNZIP PCT4DOC │
- echo │ │
- echo │ Note: You must have 1.4 megabytes available on your hard disk to │
- echo │ complete these steps. │
- echo └────────────────────────────────────────────────────────────────────┘
- echo If you have not already "unzipped" the documentation files, press
- echo (Ctrl)(Break) now, and follow the steps listed above.
- echo .
- pause
- cls
- echo ┌────────────────────────────────────────────────────────────────────┐
- echo │ The PC-Type 4.0 Manual is about to be printed to the printer at │
- echo │ LPT1. The manual is about 400 pages long. Make sure your printer │
- echo │ is ready, with LOTS of paper. │
- echo │ │
- echo │ WARNINGS . . . │
- echo │ 1. Because the manual includes graphics characters, you must print │
- echo │ to a graphics printer. If printed on a non-graphics printer, │
- echo │ many of the screen shots and menus will not print properly. │
- echo │ │
- echo │ 2. The PC-Type 4.0 manual is configured for a page length of 62. │
- echo │ If printing on a dot matrix printer with the skip-over perfora- │
- echo │ tion option turned on, you must turn this option off. Refer to │
- echo │ your printer manual for information on how to do this. If │
- echo │ printing to a laser printer, you must set your page length to a │
- echo │ minimum of 62. 66 is the optimum setting. If you do not do │
- echo │ this, a blank page will be printed after each page. │
- echo └────────────────────────────────────────────────────────────────────┘
- echo Press (Ctrl)(Break) now or at any time to cancel printing.
- echo When you're ready to begin printing, press a key.
- echo .
- pause
- copy intro lpt1
- copy part1 lpt1
- copy part2 lpt1
- copy part3 lpt1
- copy appendix lpt1
- copy index lpt1